Description
The ABB ACS355 1.5kW 230V 3ph to 3ph AC Inverter Drive is the perfect solution for your industrial machinery needs. With its powerful features like STO and C3 EMC, you can be certain that your operators are always safe and your equipment is well-protected from electrical interference. Plus, our expert repairing services ensure that any issues with your drive are resolved quickly and efficiently, so you can get back to your production line as soon as possible. Trust the ABB ACS355 to give you the reliable performance you need for your industrial machinery.
ABB ACS355 AC Frequency Inverter for 1.5kW (2HP) 230V 3 Phase motor in VxF or Sensorless Vector control to 7.5A. Simple to set-up for use with 3 phase 230V input and a three phase 230V standard AC Induction motor or permanent magnet synchronous motor.
No Keypad included.
Size R1 – 70mm Wide x 161mm Deep x 169mm high (239mm high including fastenings and clamp plate). IP20.
Weight: 1.2kg.
Overload – 150% x 60 seconds every 10 minutes, 175% x 2 seconds at start
Speed Control Range – 0-600Hz.
Braking at full load for 19 seconds every 120 seconds to 30 Ohm minimum, 100 Ohm Maximum external resistor (not supplied) – See the Resistor options linked below or use the ‘Which Resistor’ button on this page.
Features – 2 x Analogue Inputs, 5 x Digital Inputs, 1 x Analogue Output, 1 x Digital Output, 1 x Relay Contact set.
DC Bus terminals with charge limit in circuit for DC supply or common bus energy saving applications.
‘Safe Torque Off’ function to SIL 3.
Programmable from a PC via ‘DriveWindow’ or using the ABB FlashDrop tool.
Input Current – 12A.
Input Voltage – 200-240V Three Phase at 50/60Hz ±5%.
EMC Filters to IEC/EN 61800-3 2nd Environment C3 (Industrial)
Wall mount in clean environment or cubicle mount.
Rated at 40°C Ambient.
Ventilation space above and below – 75mm.
Ventilation space at sides – 0mm (drives can be mounted side by side)
Heat Loss at max output – 88.4W.
Mounting via 35mm DIN rail at rear or
Mounting via 4 x 5mm diameter holes at rear on 50mm x 191mm centres or
Mounting via 3 x 5mm diameter holes at side on 41 x 191mm centres.
Full part number is – ACS355-03E-07A5-2 (3AUA0000058175) and is a direct replacement for the equivalent ACS350.
Reviews
There are no reviews yet.