Description
Looking for a high-performance inverter drive that can help you optimize your industrial processes? Check out the ABB ACS150 2.2kW 230V 3ph AC Inverter Drive! This reliable device can control your motors with precision, saving energy and maximizing efficiency. Plus, with DBr and C3 EMC ratings, it’s built to withstand tough operating conditions. Need repair services? We’ve got you covered with top-quality solutions from our expert technicians.
Don’t settle for anything less than the best when it comes to controlling your motors: choose the ABB ACS150 2.2kW 230V 3ph AC Inverter Drive! This high-quality device is engineered to deliver top-notch performance in a range of applications, from pumps and fans to conveyors and more. With a compact design and easy-to-use interface, it’s a breeze to install and operate. And if you require repairs or maintenance, our team of seasoned professionals is here to help. Trust us to keep your equipment running smoothly and efficiently!
ABB Drives ACS 150 AC Frequency Inverter Variable Speed Drive Controller (VFD) for a 2.2kW (3HP) 230V 3 Ph motor in VxF control to 9.8A. Converts fixed frequency Single Phase 230V input to variable frequency three phase 230V output to control the speed of a standard AC Induction motor.
Dimensions: R2 Size, 105mm Wide x 144mm Deep x 169mm high (plus cable clamp plate at 70mm).
Enclosure Rating: IP20 case.
Overload: 150% x 60seconds.
Speed Control Range: 0/400Hz without de-rating or 0/500Hz de-rated to 80%.
Switching Frequency: 4kHz (default) or selectable to 8kHz, 12kHz or 16kHz at 20%, 35% and 50% de-rating.
Braking: To 30 Ohm Minimum, 70 Ohm Maximum external resistor (not supplied). See the Resistor options linked below or use the ‘Brake Resistor Calculator’ on this page.
Features: Front Mounted Potentiometer, 1 x Analogue Input, 5 Digital Inputs, 1 Relay Contact set.
Programmable from a pc via ‘Flashdrop’.
EMC Filters: EN61800-3 to the 2nd Environment C3 (Industrial). See linked products below for external 1st Environment (Domestic) EMC Filter.
Can be installed with supplies protected by RCD Type A.
Input Current: 21A, or 15A when supplied via 1mH choke.
Input Voltage: 200V/240V single phase +-10% at 50/60Hz.
Mounting: Cubicle mount onto symmetrical DIN rail or use the screw fixings for side or rear mounting. Wall mount when the top cover and gland box option is added, see the linked products below.
Ambient: Rated at 40C.
Ventilation space above and below: 75mm.
Ventilation space at sides: 0mm.
Heat Loss at max output: 113W.
Part number: ACS150-01E-09A8-2 (68581991)
Reviews
There are no reviews yet.