Description
ABB Drives ACH 550 HVAC AC Frequency Inverter and Keypad for 7.5kW (10HP) 400V 3 Ph motor in VxF or Sensorless Vector control to 15A. Simple to set-up with 400V three phase input for a standard AC Induction motor.
Features – Basic Keypad, 2 x Analogue Inputs, 2 x Analogue Outputs, 6 x Digital Inputs, 3 x Relay Contact sets.
5% Swing choke included to minimise supply Harmonics.
EMC and RFI Filters included to 1st Environment (unrestricted) to EN61800-3.
Application Macros included for 12 x most common HVAC Applications.
R2 Size – 125mm Wide x 222mm Deep x 469mm high in IP21 wall mounting case.
Gland plate base included for 2 x 22mm, 1 x 28mm and 2 x 35mm cable glands.
Overload – 110% x 60seconds every 10 minutes.
Speed Control Range – 0/500Hz.
Braking – none.
Input Current – 15.4A.
Input Voltage – 380 to 480V three phase +-10% at 50/60Hz via 20A Bussman JJS-20 fuses or equal.
Input Power Factor – 0.98
Wall mount in clean environment or cubicle mount.
Rated at 40C Ambient.
Heat Loss at max output – 232W.
Mounting via rear screw fixings at 98mm x 418mm centres for M5 screws.
Full part number is – ACH550-01-015A-4
Reviews
There are no reviews yet.