Description
Mitsubishi Automation D710W Series AC Frequency Inverter for 0.18kW (0.25HP) 230V 3 Ph motor in VxF or Sensorless Vector control to 1.4A. Simple to set-up and converts Single Phase 115V input to three phase 0-230V for a standard AC Induction motor.
Size: 68mm Wide x 110.5mm Deep x 128mm high. IP20.
Weight: 0.7kg
Overload – 150% x 60 Seconds and 200% for 0.5 seconds.
Speed Control Range – 0.2-400Hz.
Braking – None.
Features – Front Mounted Potentiometer, 2 x Analogue Inputs, 5 Digital Inputs, 1 Analogue output, 1 Relay Contact set and 1 digital output.
Programmable from the Keypad, a pc via FR-Configurator software (V30010-E), or from the 10 key hand-held parameter unit (see Linked Products below).
EMC Filters – None.
Input Current: not specified.
Input Voltage: 100-115V Single Phase -10%, +15% at 50-60Hz +/- 5%.
Output Voltage: Zero to double Input Voltage
Cubicle or enclosure mounting.
Rated at 50°C Ambient.
Ventilation space above and below – 100mm.
Ventilation space at sides – 0mm up to 40°C, or 10mm above 40°C.
Ventilation space in front – 10mm.
Heat Loss at max output – not specified.
Mounting via 3 x 5mm diameter holes at rear on 56mm x 118mm centres.
Full part number is – FR-D710W-0.2K (219060)
Reviews
There are no reviews yet.