Description
Invertek Optidrive E3 IP20 series AC Inverter for 0.37kW (0.5HP) 115V single phase motor in VxF control to 7A. Converts fixed frequency single phase 115V input to variable frequency 115V to control the speed of a Single Phase Cap Run (permanent-split capacitor) or shaded pole motor. Not suitable for use with high starting torque motors such as Cap Start (cap cap).
Dimensions: Size 1, 83mm Wide x 123mm Deep x 173mm High.
Enclosure Rating: IP20.
Weight: 1kg.
Overload: 150% x 60 seconds, 175% x 2.5 seconds
Speed Control Range: 0-120Hz.
Braking: No dynamic braking.
Integrated operator keypad with 6-digit LED display, 2 Analogue/Digital Inputs, 1 Digital Input, 1 Digital Input/Output, 1 Analogue/Digital Output, 1 Relay Contact set, RJ45 socket for Modbus RTU communications over RS485 or PC Connection to OptiTools Studio software.
Input Current: 8.5A
Input Voltage: 110-115V Single Phase ±10% at 50-60Hz ±5% ia 16A supply fuse or Type B MCB.
EMC Compliance: IEC EN61800-3:2004 Category C1 (Industrial and Domestic). Can be disabled via screw if required.
Cubicle mount.
Rated 50° Ambient.
Ventilation space in front: [Not Specified]
Ventilation space above and below: 50mm
Ventilation space at sides: 50mm
Mounting via 35mm DIN rail or 4 x holes for M4 bolts at rear on 50mm x 162mm centres.
Manufacturer part number is ODE-3-110070-1F12-01. (Replaces ODE-2-11005-1HB12-01)
Made in the UK.
Reviews
There are no reviews yet.