Description
When it comes to your solar power system, you want to make sure you’re getting the best of the best. That’s why we recommend the ABB ACS355 Solar IP66 2.2kW 230V 3ph to 3ph AC Inverter. With weather-resistant design, safety features like STO, and C3 EMC compliance, this inverter is built for both reliability and efficiency. Plus, with optional N827 repair services available, you can be sure your solar power system will always be in top shape. Get the most out of your solar power with the ABB ACS355 Solar IP66.
ABB ACS355 AC Frequency Inverter for 2.2kW (3HP) 230V 3 Phase motor in VxF or Sensorless Vector control to 13.3A. Simple to set-up for use with 3 phase 230V input and a three phase 230V standard AC Induction motor or permanent magnet synchronous motor.
Supplied with Assistant Control Panel.
Includes Solar Firmware Option (+N827)
Size R3 – 195mm Wide x 281mm Deep x 305mm high (346mm high including glands). IP66. (+B063)
Weight: 7.7kg.
Overload – 150% x 60 seconds every 10 minutes, 175% x 2 seconds at start
Speed Control Range – 0-600Hz.
Braking at full load for 16 seconds every 120 seconds to 30 Ohm minimum, 50 Ohm Maximum external resistor (not supplied) – see the Resistor options linked below or use the ‘Which Resistor’ button on this page.
Features – 2 x Analogue Inputs, 5 x Digital Inputs, 1 x Analogue Output, 1 x Digital Output, 1 x Relay Contact set.
DC Bus terminals with charge limit in circuit for DC supply or common bus energy saving applications.
‘Safe Torque Off’ function to SIL 3.
Programmable from a PC via ‘DriveWindow’ or using the ABB FlashDrop tool.
Input Current – 21.7A.
Input Voltage – 200-240V Three Phase at 50/60Hz ±5%.
EMC Filters to IEC/EN 61800-3 2nd Environment C3 (Industrial)
Wall mount in clean environment or cubicle mount.
Rated at 40°C Ambient.
Ventilation space above and below – 75mm.
Ventilation space at sides – 0mm (drives can be mounted side by side)
Heat Loss at max output – 139.5W.
Mounting via 35mm DIN rail at rear or
Mounting via 4 x 5mm diameter holes at rear on 85mm x 191mm centres or
Mounting via 3 x 5mm diameter holes at side on 41 x 191mm centres.
Full part number is – ACS355-03E-13A3-2+B063+N827 (3AUA0000157205).
Reviews
There are no reviews yet.