Description
Make the most of your solar power system with the ABB ACS355 Solar IP66 1kW 230V 3ph to 3ph AC Inverter, STO, C3 EMC (+N827). This high-performance inverter is designed to convert solar energy into usable electricity with maximum efficiency and minimal waste. Plus, with its waterproof and dustproof construction, it’s built to last even in the harshest environments. And when it comes to maintenance and repairs, our team of experts are here to provide you with exceptional service and support. Switch to ABB today for reliable, stress-free energy solutions.
ABB ACS355 Solar AC Frequency Inverter for 1kW 230V 3 Phase motor in VxF or Sensorless Vector control to 7.5A. Simple to set-up for use with 3 phase 230V input and a three phase 230V standard AC Induction motor or permanent magnet synchronous motor. Including Solar Pump Firmware option 827
No Keypad included.
N827 Solar option included
Size R1 – 216mm Wide x 303mm Deep x 305mm high (346mm high including fastenings and clamp plate).
Enclosure IP66
Weight: 7.7kg.
Overload – 150% x 60 seconds every 10 minutes, 175% x 2 seconds at start
Speed Control Range – 0-600Hz.
Braking at full load for 16 seconds every 120 seconds to 30 Ohm minimum, 100 Ohm Maximum external resistor (not supplied) – see the Resistor options linked below or use the ‘Which Resistor’ button on this page.
Features – 2 x Analogue Inputs, 5 x Digital Inputs, 1 x Analogue Output, 1 x Digital Output, 1 x Relay Contact set.
DC Bus terminals with charge limit in circuit for DC supply or common bus energy saving applications.
‘Safe Torque Off’ function to SIL 3.
Programmable from a PC via ‘DriveWindow’ or using the ABB FlashDrop tool.
Input Current – 12A.
Input Voltage – 200-240V Three Phase at 50/60Hz ±5%.
EMC Filters to IEC/EN 61800-3 2nd Environment C3 (Industrial)
Wall mount in clean environment or cubicle mount.
Rated at 40°C Ambient.
Ventilation space above and below – 75mm.
Ventilation space at sides – 0mm (drives can be mounted side by side)
Heat Loss at max output – 88.4W.
Mounting via 35mm DIN rail at rear or
Mounting via 4 x 5mm diameter holes at rear on 85mm x 191mm centres or
Mounting via 3 x 5mm diameter holes at side on 41 x 191mm centres.
Full part number is – ACS355-03E-07A5-2+N827+B063 (3AUA0000157203)
Reviews
There are no reviews yet.