Description
Investing in a high-quality AC inverter is key to getting the most out of your solar power setup. That’s why we recommend the ABB ACS355 Solar IP20 1.5kW 230V 1ph to 3ph AC Inverter with DBr, STO, and C3 EMC (+N827). With its robust design and advanced features, you can rest assured that your solar panels will be functioning at their best. And in the rare event that you need repairs, our dependable Repairing Services are available to get you back up and running in no time.
ABB ACS355 Solar AC Frequency Inverter for 2.2kW 230V 3 Phase motor in VxF or Sensorless Vector control to 13.3A. Simple to set-up for use with 3 phase 230V input and a three phase 230V standard AC Induction motor or permanent magnet synchronous motor. Including Solar Pump Firmware option 827
No Keypad included.
N827 Solar option included
Size R2 – 105mm Wide x 165mm Deep x 169mm high (239mm high including fastenings and clamp plate). IP20.
Weight: 1.7kg.
Overload – 150% x 60 seconds every 10 minutes, 175% x 2 seconds at start
Speed Control Range – 0-600Hz.
Braking at full load for 16 seconds every 120 seconds to 30 Ohm minimum, 50 Ohm Maximum external resistor (not supplied) – see the Resistor options linked below or use the ‘Which Resistor’ button on this page.
Features – 2 x Analogue Inputs, 5 x Digital Inputs, 1 x Analogue Output, 1 x Digital Output, 1 x Relay Contact set.
DC Bus terminals with charge limit in circuit for DC supply or common bus energy saving applications.
‘Safe Torque Off’ function to SIL 3.
Programmable from a PC via ‘DriveWindow’ or using the ABB FlashDrop tool.
Input Current – 22A.
Input Voltage – 200-240V Three Phase at 50/60Hz ±5%.
EMC Filters to IEC/EN 61800-3 2nd Environment C3 (Industrial)
Wall mount in clean environment or cubicle mount.
Rated at 40°C Ambient.
Ventilation space above and below – 75mm.
Ventilation space at sides – 0mm (drives can be mounted side by side)
Heat Loss at max output – 139.5W.
Mounting via 35mm DIN rail at rear or
Mounting via 4 x 5mm diameter holes at rear on 85mm x 191mm centres or
Mounting via 3 x 5mm diameter holes at side on 41 x 191mm centres.
Full part number is – ACS355-03E-13A3-2-N827 (3AUA0000157182)
Reviews
There are no reviews yet.