Description
If you’re looking for a powerful and reliable inverter drive for your solar power system, the ABB ACS355 is an excellent option! Its compact design and advanced features like STO and C3 EMC make it both safe and efficient, and with our expert repair services, you can rest assured that you’ll always have reliable, high-quality equipment. Whether you need repairs or are starting from scratch, we’re here to help you get the most out of your solar power system!
ABB ACS355 AC Frequency Inverter for 1.1kW (1.5HP) 230V 3 Phase motor in VxF or Sensorless Vector control to 7.5A. Simple to set-up and converts single phase 230V input to three phase 230V for a standard AC Induction motor or permanent magnet synchronous motor. Including Solar Pump Firmware option 827
No Keypad included.
Size R2 – 105mm Wide x 165mm Deep x 201mm high (239mm high including fastenings and clamp plate). IP20.
Weight: 1.7kg.
Overload – 150% x 60 seconds every 10 minutes, 175% x 2 seconds at start
Speed Control Range – 0-600Hz.
Braking at full load for 19 seconds every 120 seconds to 30 Ohm minimum, 100 Ohm Maximum external resistor (not supplied) – See the Resistor options linked below or use the ‘Which Resistor’ button on this page.
Features – 2 x Analogue Inputs, 5 x Digital Inputs, 1 x Analogue Output, 1 x Digital Output, 1 x Relay Contact set.
DC Bus terminals with charge limit in circuit for DC supply or common bus energy saving applications.
‘Safe Torque Off’ function to SIL 3.
Programmable from a PC via ‘DriveWindow’ or using the ABB FlashDrop tool.
Input Current – 17A.
Input Voltage – 200-240V Single Phase at 50/60Hz ±5%.
EMC Filters to IEC/EN 61800-3 2nd Environment C3 (Industrial)
Wall mount in clean environment or cubicle mount.
Rated at 40°C Ambient.
Ventilation space above and below – 75mm.
Ventilation space at sides – 0mm (drives can be mounted side by side)
Heat Loss at max output – 101W.
Mounting via 35mm DIN rail at rear centered 50mm form top of back plate or
Mounting via 4 x 5mm diameter holes at rear on 85mm x 191mm centres or
Mounting via 3 x 5mm diameter holes at side on 41 x 191mm centres.
Full part number is – ACS355-01E-07A5-2+N827 (3AUA0000157175).
Reviews
There are no reviews yet.