ABB ACS355 Solar IP20 0.75kW 230V 1ph to 3ph AC Inverter, STO, C3 EMC (+N827) ACS355-01E-06A7-2+N827 Repairing Services

Looking for a reliable AC inverter that’s perfect for solar systems? Consider the ABB ACS355 Solar IP20! With a power rating of 0.75kW, it can convert single-phase power to 3-phase power with ease. You’ll also appreciate features like STO (safe torque off) and C3 EMC (+N827) compliance for enhanced safety and electromagnetic compatibility. Plus, if you ever need repair services, we’ve got you covered!

Contact us to inquire about this product

If you love this product and wish for a customized quote contact us at number +9190449 0777 and we will be happy to provide you with more info!

Add To Inquiry

Description

Looking for an AC inverter that can keep your solar system running smoothly and safely? Look no further than the ABB ACS355 Solar IP20. Its 0.75kW power rating is perfect for small- to medium-sized solar arrays, and features like STO and C3 EMC (+N827) compliance add an extra layer of safety and reliability. And with our top-notch repairing services, you can be sure that your inverter will continue to deliver dependable performance for years to come.

ABB ACS355 AC Frequency Inverter for 0.75kW (1HP) 230V 3 Phase motor in VxF or Sensorless Vector control to 6.7A. Simple to set-up and converts single phase 230V input to three phase 230V for a standard AC Induction motor or permanent magnet synchronous motor.  Including Solar Pump Firmware option 827

No Keypad included.

Size R1 – 70mm Wide x 161mm Deep x 169mm high (239mm high including fastenings and clamp plate). IP20.
Weight: 1.8kg.

Overload – 150% x 60 seconds every 10 minutes, 175% x 2 seconds at start
Speed Control Range – 0-600Hz.
Braking at full load for 28 seconds every 120 seconds to 40 Ohm minimum, 130 Ohm Maximum external resistor (not supplied) – See the Resistor options linked below or use the ‘Which Resistor’ button on this page.

Features – 2 x Analogue Inputs, 5 x Digital Inputs, 1 x Analogue Output, 1 x Digital Output, 1 x Relay Contact set.
DC Bus terminals with charge limit in circuit for DC supply or common bus energy saving applications.
‘Safe Torque Off’ function to SIL 3.
Programmable from a PC via ‘DriveWindow’ or using the ABB FlashDrop tool.

Input Current – 16A.
Input Voltage – 200-240V Single Phase at 50/60Hz ±5%.
EMC Filters to IEC/EN 61800-3 2nd Environment C3 (Industrial)

Wall mount in clean environment or cubicle mount.
Rated at 40°C Ambient.
Ventilation space above and below – 75mm.
Ventilation space at sides – 0mm (drives can be mounted side by side)
Heat Loss at max output – 97W.
Mounting via 35mm DIN rail at rear centered 50mm form top of back plate or
Mounting via 4 x 5mm diameter holes at rear on 50mm x 191mm centres or
Mounting via 3 x 5mm diameter holes at side on 50mm x 191mm centres.

Full part number is – ACS355-01E-06A7-2+N827 (3AUA0000157174).

Reviews

There are no reviews yet.

Be the first to review “ABB ACS355 Solar IP20 0.75kW 230V 1ph to 3ph AC Inverter, STO, C3 EMC (+N827) ACS355-01E-06A7-2+N827 Repairing Services”

Your email address will not be published. Required fields are marked *