Description
Greetings! Want a powerful and dependable AC inverter drive that can handle a variety of loads? Look to the ABB ACS355 1.1kW 230V 1ph to 3ph AC Inverter Drive. With its ability to control induction motors and permanent magnet motors, as well as its dynamic braking, safe torque off, and C3 EMC compliance, this drive is the perfect solution for a wide range of industries. And if you ever need repairs, our team is ready to assist with prompt and professional services.
ABB ACS355 AC Frequency Inverter for 1.1kW (1.5HP) 230V 3 Phase motor in VxF or Sensorless Vector control to 6.7A. Simple to set-up and converts single phase 230V input to three phase 230V for a standard AC Induction motor or permanent magnet synchronous motor.
Supplied with ACS-CP-C Basic Control Panel (keypad). Also available without an operator keypad – see linked products below. Note that the stock quantity shown applies with or without a keypad.
Dimensions: Size R1 – 70mm Wide x 161mm Deep x 169mm high (239mm high including fastenings and clamp plate).
Enclosure Ratng: IP20.
Weight: 1.2kg.
Overload: 150% x 60 seconds every 10 minutes, 175% x 2 seconds at start
Speed Control Range: 0-600Hz.
Braking: at full load for 28 seconds every 120 seconds to 40 Ohm minimum, 130 Ohm Maximum external resistor (not supplied). See the Resistor options linked below or use the ‘Which Resistor’ button on this page.
Features: 2 x Analogue Inputs, 5 x Digital Inputs, 1 x Analogue Output, 1 x Digital Output, 1 x Relay Contact set.
DC Bus terminals with charge limit in circuit for DC supply or common bus energy saving applications.
‘Safe Torque Off’ function to SIL 3.
Programmable from a PC via ‘DriveWindow’ or using the ABB FlashDrop tool.
Input Current: 16.1A, or 11A when supplied via 1.2mH choke.
Input Voltage: 200V to 240V Single Phase at 50/60Hz ±5%.
EMC Filters: to IEC/EN 61800-3 2nd Environment C3 (Industrial)
Cubicle Mounting: onto symmetrical DIN rail, or via 4 x 5mm diameter holes at rear on 50mm x 191mm centres, or 3 x 5mm diameter holes at the side on 41 x 191mm centres.
Wall Mounting: in a clean environment when fitted with the optional top cover and gland box linked below.
Ambient Temperature: Rated at 40°C .
Ventilation Space: 75mm above and below, 0mm at sides (drives can be mounted side by side)
Heat Loss: 97.4W at maximum output.
Part Number (without ACS-CP-C): ACS355-01E-06A7-2 (3AUA0000058168) and is a direct replacement for ACS350-01E-06A7-2.
Reviews
There are no reviews yet.