Description
Say goodbye to sluggish motors and hello to the ABB ACS350 AC inverter drive speed controller. With a power output of 1.5kW and the ability to convert single-phase input into three-phase output, you’ll enjoy improved efficiency and precise control over your machinery. And if you ever need repairs, our team of experts is here to provide fast, reliable service so that you can get back to work in no time.
ABB ACS350 AC Frequency Inverter for 1.5kW (2HP) 230V 3 Ph motor in VxF or Vector control to 7.5A. Simple to set-up and converts single phase 230V input to three phase 230V for a standard AC Induction motor.
R2 Size – 105mm Wide x 165mm Deep x 202mm high (plus cable clamp plate at 37mm) IP20 case.
Overload – 150% x 60seconds.
Speed Control Range – 0/500Hz.
Braking – To 56 Ohm minimum external resistor (not supplied) – use the ‘Which Resistor’ button on this page.
Features – Basic Keypad, Front Mounted Potentiometer, 2 x Analogue Inputs, 5 x Digital Inputs, 1 x Analogue Output, 1 x Digital Output, 1 x Relay Contact set.
Programmable from a pc via ‘Flashdrop’.
EMC Filters to EN61800-3 to the 2nd Environment (Industrial).
Input Current – 16.8A.
Input Voltage – 200/240V single phase +-10% at 50/60Hz.
Wall mount in clean environment or cubicle mount.
Rated at 40C Ambient.
Ventilation space above and below – 75mm.
Ventilation space at sides – 0mm (drives can be mounted side by side).
Heat Loss at max output – 27.5W.
Mounting onto symmetrical DIN rail or use the screw fixings for side or rear mounting.
Full part number is – ACS350-01E-07A5-2+J404
Reviews
There are no reviews yet.