Description
Get the most out of your industrial system with the ABB ACS350 AC inverter drive speed controller! Offering 0.37kW of power and the ability to convert a single-phase power source into a three-phase power source, this versatile unit is perfect for a wide range of applications. Thanks to its simple keypad and intuitive interface, you’ll be able to fine-tune your system with ease. And with our professional repairing services, you can trust the ABB ACS350 to keep your operations up and running for years to come.
ABB ACS350 AC Frequency Inverter for 0.37kW (0.5HP) 230V 3 Ph motor in VxF or Vector control to 2.4A. Simple to set-up and converts single phase 230V input to three phase 230V for a standard AC Induction motor.
No Keypad included – see linked products below for ACS 350 equivalent with Keypad.
R0 Size – 70mm Wide x 144mm Deep x 201mm high (plus cable clamp plate at 38mm) IP20 case.
Overload – 150% x 60seconds.
Speed Control Range – 0/500Hz.
Braking – To 100 Ohm minimum external resistor (not supplied) – use the ‘Which Resistor’ button on this page.
Features – 2 x Analogue Inputs, 5 x Digital Inputs, 1 x Analogue Output, 1 x Digital Output, 1 x Relay Contact set.
Programmable from a pc via ‘Flashdrop’.
EMC Filters to EN61800-3 to the 2nd Environment (Industrial).
Input Current – 6.1A.
Input Voltage – 200/240V single phase +-10% at 50/60Hz.
Wall mount in clean environment or cubicle mount.
Rated at 40C Ambient.
Ventilation space above and below – 75mm.
Ventilation space at sides – 0mm.
Heat Loss at max output – 22.7W.
Mounting onto symmetrical DIN rail or use the screw fixings for side or rear mounting.
Full part number is – ACS350-01E-02A4-2
Reviews
There are no reviews yet.