Description
ABB Drives ACH 550 HVAC AC Frequency Inverter and Keypad for 15kW (20HP) 400V 3 Ph motor in VxF or Sensorless Vector control to 31A. Simple to set-up with 400V three phase input for a standard AC Induction motor.
R3 Size – 267mm Wide x 254mm Deep x 629mm high. IP54.
Gland plate base included for 3 x 22mm, 1 x 44mm and 2 x 50mm cable glands.
Features – Basic Keypad, 2 x Analogue Inputs, 2 x Analogue Outputs, 6 x Digital Inputs, 3 x Relay Contact sets.
5% Swing choke included to minimise supply Harmonics.
EMC and RFI Filters included to 1st Environment (unrestricted) to EN61800-3.
Application Macros included for 12 x most common HVAC Applications.
Overload – 110% x 60seconds every 10 minutes.
Speed Control Range – 0/500Hz.
Braking – none.
Input Current – 31A.
Input Voltage – 380 to 480V three phase +-10% at 50/60Hz via 40A Bussman JJS-40 fuses or equal.
Input Power Factor – 0.98
Enclosure: IP54
Rated at 40C Ambient.
Heat Loss at max output – 457W.
Wall Mount via holes at rear on 160mm and 98mm x 473mm centres for M6 screws.
Full part number is – ACH550-01-031A-4+B055.
Reviews
There are no reviews yet.