GC500 sedemac Repairing Service

Description

Is your GC500 giving you trouble? Don’t worry, our repairing service is here to help! Our team of experts is trained to diagnose and repair any issue with your device. Whether it’s a broken screen or malfunctioning buttons, we’ve got you covered. We use only high-quality replacement parts to ensure that your GC500 is restored to its original state. Trust us to get your device back up and running in no time!

If your GC500 needs a repair, look no further than our expert repairing service. Our team is highly trained and has years of experience fixing all kinds of issues with the GC500. We use only the best replacement parts to ensure that your device is repaired to the highest standard. You can count on us to get your GC500 working perfectly again!

FEATURE:

• Full graphics back-lit LCD display with power save mode
• Monitors voltage and frequency of generator (1-Ph/3-Ph)
• Monitors engine safety parameters through analog resistive sensors and digital switch inputs (e.g. lube oil pressure, engine temperature, fuel level)
• Commands start relay, fuel, stop relay, alarm hooter and more
• Supports the battery charging alternator I/O interface
• Commands the genset to start or stop through the preconfigured remote start/stop input
• Versatile software capable of handling “events” during operation; Event log for 30 events for analysing the data
• Incremental counters for engine starts, stops & running hours
• Communicates with PC via Windows based configuration utility called SEDEMAC-Smart Config. through a USB port

 

 

 

 

Ordering Information:

GC500 Controller……………………………… SM0003919

SPECIFICATION:

Environmental testing standards

Operating/Storage temperature

-20˚C to 65˚C/-30˚C to 70˚C, as per IEC 60068-2-1, 2

Vibration

2G in X,Y and Z axes for 8-500 Hz, as per IEC 60068-2-6

Humidity

0% to 95% RH, as per IEC 60068-2-78

EMI/EMC

Compliance as per IEC 61000-6-2, 4

Power Supply

8V – 32V DC continuous; power transients as per ISO 7637 – 2

Ingress Protection

IP65 for front face with optional gasket, as per IEC 60529

Shock

15 g for 11 mS, compliance as per IEC 60068-2-27

Technical

Maximum Standby Current

~0.08A @ 12V or 24V DC

Crank-Start Dropout Survival Period

50 mS for a drop from 12V DC

Charging Alternator Interface

0.25A @ 12V DC; 0.125A @ 24V DC

Diagnostic voltage measurement

Digital Output

6x 0.75A high-side drivers configurable for pre-heat, hooter, etc.

Digital Input

5 switch-to-ground inputs configurable for lube oil, temp, fuel level, etc.

Analog Input

3 resistive inputs (10Ω – 1000Ω); Fully configurable for various sources

Genset Voltage Measurement

20V-350V AC RMS @ 5 – 75 Hz for Ph to N

Dimensions

External dimensions: 139 mm x 114 mm x 37.5 mm Mounting panel cut: 118 mm x 93 mm